9
Preparations
Chapter 02
Attaching the Stand
―
Disassembly is the reverse order of assembly.
―
The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
S57CG95*N
x 4
x 2
1
2
Connect the corresponding cables. Collect cables and then align them with the centre groove of COVER REAR SUB.
Assembly the COVER REAR SUB on the rear of the product.
3 4
5
6
Place the stand neck on the monitor
as shown in the figure.
Fasten the screws at the top of the
stand neck.
Insert the stand base into the stand
neck in the direction as shown in the
figure.
Disassemble the COVER-REAR TOP. Assemble the COVER-REAR TOP to the stand
neck as shown in the figure. Rotate the COVER-REAR TOP clockwise.
Installation
To Next Page
Loading...
