35
Ⅲ.ADJUSTMENT
2) Upgrading the Firmware
1. Insert the SD card containing the firmware file into the camera.
※ Updating the firmware will delete all the data in the Flash memory. Be sure to back up all the data onto
your PC before updating the firmware.
The file name must be "s385n.elf". (Copy the file to the root directory of the SD card.)
2. Connect the AC adapter or a fully charged battery.
※ To upgrade the firmware, the battery level indicator on the LCD monitor must be full (level three).
3. Turn the camera off.
4. Press and hold the PLAY button for approximately 2 seconds while holding down the WIDE button.
To Next Page
Loading...
