1.Connect the camcorder to a TV with the AUDIO/VIDEO cable.
The yellow plug : Video
The white plug : Audio(L) - Mono
The red plug : Audio(R)
2. Set the Power Switch to the PLAY position.
3. Using the (FF) and (REW) buttons, find the first position
you wish to play back.
Press the (PLAY/STILL) button.
1 2
4
3
5
4
1. Turn the Power switch to OFF.
2. Insert the Memory Card into the Memory Card slot located on
the side of the Camcorder, in the direction of the arrow.
3. Set the Power Switch to
(CAMERA)
.
4. Turn the Mode Dial to the
(PROGRAM)
mode to take Still
Images.
To take motion clips, turn the Mode Dial to the
(MOVIE).
5. Still Image :
Press the PHOTO button to record a picture.
Motion Clip :
Press the START/STOP button to start
recording.
1. Turn the Power switch to OFF.
2. Insert the Memory Card into the Memory Card slot located on
the side of the Camcorder, in the direction of the arrow.
3. Set the Power Switch to
(CAMERA)
.
4. Turn the Mode Dial to the
(PLAY)
mode.
5. Still Image :
Using the 5-Way Button, browse your Still Images
.
MPEG4 : Press the (PLAY/STILL) button to start play
back. You can use the (FF) and (REW)
buttons during the MPEG play back.
Press the (STOP) button to stop the play back.
S-VIDEO
Multi-AV
AUDIO(R)
AUDIO(L)
VIDEO
1 2 3
To Previous Page
Loading...
