English _21
● OPERATING YOUR CAMERA
EXPOSURE
1. When the SETUP menu screen is displayed,
select <EXPOSURE> by using the Function
Setup switch so that the arrow indicates
<EXPOSURE> .
2. Select a desired mode using the Function
Setup switch.
• BRIGHTNESS : Adjust the screen brightness.
• SHUTTER : You can select the shutter.
- – – – : 1/30sec
- A.FLK : Select this when you experience
picture flicker, this happen when there is a
clash with the installed lighting frequency.
- ESC : Select this to control the shutter speed
automatically. If ESC is selected, the shutter
speed is automatically controlled depending on
the ambient illumination of the subject.
- MANUAL : You can control shutter speed manually (1/30sec ~ 1/12,000sec)
J
When you use a DC lens, set the shutter mode to --- if color rolling occurs.
Carefully position the camera when installing, since produced image quality might be poor if
framing a bright light source while the shutter mode of EXPOSURE is set to AUTO.
When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
MAIN SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. SSDR ON
5. BACKLIGHT OFF
6. SSNR3 ON
7. DAY/NIGHT AUTO
8. SPECIAL
9. EXIT
►
EXPOSURE SETUP
1. BRIGHTNESS
*
.... .... .... ....
50
2. SHUTTER A.FLK
3. AGC HIGH
4. SENS-UP ON
5. RETURN
►
To Next Page
Loading...
