Samsung SCB-6000 - Page 29

English _29
● OPERATING YOUR CAMERA
• IMAGE ADJ :
1) When the SPECIAL menu screen is displayed,
select <IMAGE ADJ> by using the Function
Setup switch so that the arrow indicates
<IMAGE ADJ>.
2) Select a desired mode using the Function Setup switch.
- MONITOR : Please change the settings value
of video appropriate to your monitor.
• LCD : Please select this menu item when
using an LCD monitor.
• USER : Please use this menu item when
using a monitor other than standard ones.
You can change the gamma, PED level and
color gain in the sub menus.
- V-REV : You can flip the picture vertically on the screen.
- H-REV : You can flip the picture horizontally on the screen.
- D-ZOOM : You can use a digital zoom of x1 ~ x16.
- SHARPNESS : As you increase this value, the picture outline becomes stronger and
clearer. Adjust this value appropriately depending on the sharpness of the picture.
- FONT COLOR :
You can change the OSD font color. (White, Yellow, Green, Red, Blue)
- VIDEO FORMAT : Sets the video output format of the C-Video port on the camera
provided for test and installation.
- VIDEO SIZE : Sets the image resolution of the HD-SDI output of the camera.
Select the desired setting and press the SET button. (1080i 50, 1080p 30, 720p 50,
720p 60, 1080i 60)
- RETURN : Select this to save the settings for the IMAGE ADJ menu and to return to
the SPECIAL menu.
J

If you increase the sharpness level excessively, the image may be displayed abnormally or it
can cause a noise.
SPECIAL
1. CAM TITLE ON
2. IMAGE ADJ
3. MOTION DET ATW
4. PRIVACY ON
5. COMM ADJ ON
6. LANGUAGE ENGLISH
7. RESET
8. RETURN
►
IMAGE ADJ
1. MONTIOR LCD
2. H-REV OFF
3. V-REV OFF
4. D-ZOOM OFF
5. SHARPNESS ON
6. FONT COLOR WHITE
7. VIDEO FMT CVBS-NTSC
8. VIDEO SIZE 1080p 30
9. RETURN
►