Samsung SCD-2080R - Adjusting Camera Pan and Tilt; Pan and Tilt Adjustment Mechanism; Wall Mount Pan;Tilt Adjustment; Ceiling Mount Pan;Tilt Adjustment

English_15
● INSTALLATION
n
g
ADJUST THE PANNING AND TILTING WHILE
WATCHING THE MONITOR
You can adjust the camera to point in any direction by using the pan, Tilt
mechanism.
Pan Base can rotates by ±176°(total 352°)
Tilt Base covers 73˚ angle.
Rotate Base moves by 174° to each side direction and 348° on the whole.
Methods of adjustment
When installing on a wall
➊
After mounting the camera on a wall, adjust the panning angle so that the
correct viewing angle is attained and the titling is correctly orientated.
➋
And then adjust the tilting angle by rotating the tilt base.
➌
Loosen the rotate base hold screw and adjust rotate base for the best view.
➍
Tighten pan and tilt securing screw.
When installing on a ceiling
➊
After mounting the camera on a ceiling, adjust the panning angle so that the
correct viewing angle is attained and the titling is correctly orientated.
➋
And then adjust the tilting angle by rotating the tilt base.
➌
Loosen the rotate base hold screw and adjust rotate base for the best view.
➍
Tighten pan and tilt securing screw.
When you want to adjust the Pan/Tilt Base, loosen, adjust and then tighten the Pan/Tilt Base
screws.
1.
y
y
y
2.
y
y

73˚
174˚
176˚
Pan Base
Tilt Base
Rotate Base