setup
40_
setup
Exposure
The Exposure settings control the camera’s exposure level.
Brightness :
Adjusts the screen brightness.
(Over 50: Brighter, Under 50: Darker)
Iris
AUTO : Automatically adjusts the exposure level.
MANUAL : Enables manual adjustment of the exposure level.
(F1.6~Close: 18 levels)
Shutter : Controls the camera’s electronic shutter.
--- : The shutter speed is fi xed at 1/60 for NTSC and 1/50 for
PAL. Operates when Iris is on the Auto Mode.
ESC : Adjusts the shutter speed automatically according
to the screen brightness. Operates when the Iris is in
Manual Mode.
A.FLK : Select this setting when you experience picture
fl ickering. Flickering can happen when artifi cial
lighting frequencies clash with camera frame rates.
MANUAL : Enables manual adjustment of the shutter speed.
Sens-Up
AUTO : Automatically detects light levels and maintains a
clear picture at night or under low-light conditions.
Sens-Up Limit
: Adjusts to the maximum-powered zoom
per frame.
For optimal performance of the A.FLK mode, avoid using the mode in conjunction
with Backlight.
While the Internal Sync mode is in effect, setting the shutter to ‘---’ and facing
the camera directly to a bright light source may cause poor camera performance.
Sens-Up is disabled when the shutter is in Manual or A. FLK mode.
If the gain mode is set to “Off” or “Manual”, the Sens-Up function will not be activated.
z
z
-
-
z
-
-
-
-
z
-
f
M
Camera Setting
Zoom/Focus
White Balance ATW
Exposure
Back Light OFF
AGC HIGH
SSNR MEDIUM
SSDR
Day & Night
Others
Æ
Exposure
Brightness 050
Iris
AUTO
Shutter ---
Sens-Up AUTO
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
IR Illuminator
Initialize
Password Setting
Status
Æ
To Next Page
Loading...
