52_
setup
setup
Swing SEQ
The Swing function commands the camera to move between 2
selected locations, monitoring the route.
Pan Swing :
Activates the Pan function for the Swing operation.
Tilt Swing :
Activates the Tilt function for the Swing operation.
P/T Swing :
Activates both the Pan and Tilt functions for the Swing operation.
Swing Setting/Execute/Clear
Each of the Swing menus have sub menus with the settings.
Pan Swing Set
Setting
Execute
Clear
Pan Swing
[
ÂÂÂ
]
[
ÂÂÂ
]
Speed =64 (1~64)
Dwell Time =005(1~120) (s)
Æ
Select 2 preset locations by using the joystick.
Speed indicates the camera’s movement speed. DWELL TIME
indicates the camera’s duration of stay at a preset location.
- Execute: Executes the Swing operation.
- Clear: Deletes data in the Swing memory.
While in the Sequence mode of operation, the actual movement can be slower than specifi ed when moving the camera in
the direction of Pan and Tilt at the same time.
z
z
z
z
M
Sequence Setting
Preset
Swing SEQ
Group SEQ
Tour SEQ
PTZ Trace
Auto Run
Power On Resume ON
Swing SEQ
Pan Swing
Tilt Swing
P/T Swing
Æ
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
IR Illuminator
Initialize
Password Setting
Status
Æ
To Next Page
Loading...
