COLOR DOME CAMERA SCV-2080
30
2.
Select a desired mode using the Function Setup
switch
according to the picture display you want.
AUTO :
The mode is switched to ’Color‘ in a normal environment, but switches to ’B/W‘
mode when ambient illumination is low. To set up the switching time for AUTO
mode, press the Function Setup
switch
. You can turn on or off the burst signal
on B/W mode.
- BURST MODE : You can turn on or off the burst signal on B/W mode.
- DURATION : You can select the day/night switching point.
- DWELL TIME : You can select day/night switching delay time from.
Ą3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
* The day/night switching point of the camera can be adjusted.
Color
➞
B/W B/W
➞
Color
Early
2.5 lux 5 lux
Late
1 lux 10 lux
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
8.SPECIAL
To Next Page
Loading...
