Samsung SCV-2120 - Backlight

COLOR DOME CAMERA User Guide
20
COLOR DOME CAMERA User Guide
21
MAIN SETUP
SSDR OFF
WHITE BAL ATW
BACKLIGHT OFF
MOTION DET
OFF
Operating Your Camera
•Foreffectiveviewing oflicenseplates,thereisaminimumrequiredilluminationand
theshutterspeedneedstobefasterthan1/200sec.
•BecausetherecanbeadifferenceintheeffectivenessofHLCaccordingtothe
amount of light area in the screen,optimize the installation angle for the best HLC
performance.
•Whendark,theHLCisonlyactivatedwhenabrightlightexceedingaspecificsize.(In
NIGHTONLYmode.)
•The HLC is notactivatedindaylightorwhenbrightlight is notpresentatnight.(In
NIGHTONLYmode.)
•TheHLCisnotactivatedwhentheD-ZOOMmodeis'ON'orDISmodeis'ON'.
Notes
3.SelectadesiredmodeusingtheFunctionSetupswitchandpresstheFunctionSetupswitch.

•Select‘BLC’toadjusttheareatobe
enhanced then adjust the level.
•HLC : Enable the user to change the level,
mask tone area.

HLC (High Light Compensation) :
If the scene contains extremely bright light areas such as; from car headlight, the light
can mask out much of the on-screen detail.
- LEVEL : Adjust level of the HLC function.(LOW,MIDDLE,HIGH)
- MASK TONE : Change the brightness
- LIMIT : Enable to change the operating condition.
2. Select a desired mode using the Function Setup.
OFF : Not being used

BLC:Enablesausertodirectlyselectadesiredareafromapicture,andtoviewthe
area more clearly.
BACKLIGHT
Unlike conventional cameras, the SCV-2120 is designed to deliver a distinctive subject and
background at the same time, even when the subject is backlight, by using the features of the
proprietary W-V DSP chip.
1.WhentheSETUPmenuscreenisdisplayed,select‘BACKLIGHT’byusingtheFunctionSetup
switchsothatthearrowindicates‘BACKLIGHT’.