Samsung SCV-2120 - Page 19

COLOR DOME CAMERA User Guide
36
COLOR DOME CAMERA User Guide
37
Operating Your Camera

COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status
when controlling the camera through an external
controlled device.
 When the SPECIAL menu screen is displayed, by
moving the up or down direction of the Function Setup
Switch so that the arrow indicates ‘COMM ADJ’.
 Set up the mode moving the 4 direction of Function Setup Switch.

IMAGE ADJ : Includes image quality or special function factors.
COMMUNICATION SETUP
▶
PROTOCOL SAMSUNG-T
CAM ID 1
BAUD RATE 9600
UART MODE 8-N-1
RET PKT DISABLE
RETURN
|
|||||||||||||||||||||||||
- CAM ID : Determines the camera's identification number (between 0 and 255).
- Protocol : Select the communication PROTOCOL. (SAMSUNG-T/PELCO-D/PELCO-P/
BOSCH/HONEYWELL/VICON/AD/SAMSUNG-E/PANASONIC)
  -BAUDRATE:Youcanselect2400/4800/9600/19200/38400/57600bps.
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
- RET PKT : You can choose whether to send an ACK signal when the communication
control command is issued to the camera.
SPECIAL SETUP
PRIVACY OFF
DAY/NIGHT AUTO
DIS OFF
SYNC INT
COMM ADJ
IMAGE ADJ
MONITOR CRT
 When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by moving the up or
down direction of the Function Setup Switch so that the arrow indicates 'IMAGE ADJ.
 Select a desired mode by moving the up or down direction of the Function Setup
Switch.
- H-REV : You can flip the picture horizontally on the
screen.
- V-REV : You can flip the picture vertically on the screen.
- SHARPNESS : As you increase this value, the picture
outline becomes stronger and clearer.
IMAGE SETUP
▶
H-REV OFF
V-REV OFF
SHARPNESS ON
RETURN
SHARPNESS SETUP
▶
LEVEL 16
RETURN
||||||||||||||||||||
|
|||||
 •INT:Internalsynchronization
 •LL:Externalline-locksynchronization
· If you choose 'LL', you can adjust the desired phase.
Press the SET button.
  ·Youcanadjustthedesiredphasefrom0to359.