26_ setup
setup
BURST MODE : You can turn on or off the burst signal on B/W mode.
DWELL TIME : You can select the duration time about changing the
day/night mode.
→3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
DURATION : You can select the brightness level at which the camera
switches from day to night mode.
Color → B/W B/W → Color
Fast 2.5 lux 5 lux
Slow 1 lux 10 lux
※ Light levels are often site dependant.
EXTERN: This mode allows you to apply a desired filter to external signals.
COLOR: The picture is always displayed in color.
B/W: The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
When AGC in the EXPOSURE menu is ‘OFF’, ‘---’ mode operates as selecting ‘COLOR’ mode
and ‘AUTO’ mode cannot be selected.
Be sure to connect the Day & Night input terminal to GND when using an external input.
The OSD key does not work for 3 seconds when switching to Color or B/W, to ensure stable
camera operation.
-
-
-
y
y
y
M
AUTO SETUP
君1.BURST MODE ON
2.COLORÆB/W
DURATION FAST
DWELL TIME 5 SEC
3.B/WÆCOLOR
DURATION FAST
DWELL TIME 10 SEC
4.RETURN
To Next Page
Loading...
