Select <CAMERA SET> - <WHITE BAL>.
Select a mode where you set the <WHITE BAL>.
DAY : You can set the RED, and BLUE value
in DAY mode.
The screen will be displayed in colors
according to your settings.
You can set the R-GAIN, and B-GAIN value only in
<AWC> mode.
NIGHT : You can set the <WHITE BAL>
according to the ambient illumination.
If NIGHT mode is set to <OFF>, the <WHITE
BAL> will operate in a mode specified in
DAY mode at all times; otherwise, the screen
will switch to a mode specified in <DAY/
NIGHT>.
You can set the RED, BLUE and
BRIGHTNESS value in DAY mode. The
screen will be displayed in colors according
to your settings.
According to the specified recording mode, select a <WHITE BAL> mode with
necessary options.
ATW1,2 : The camera can automatically adjust the color temperature in real time,
according to the ambient conditions.
(Color temperature range 1: 2500K ~ 9300K, 2 : 2000K ~ 10000K)
AWC : Pressing [ENTER] on a desired item will perform ATW once.
You can set the R-GAIN/B-GAIN value.
3200K : Set the color temperature to 3200K.
5600K : Set the color temperature to 5600K.
BRIGHTNESS : Specify a brightness level switching from DAY mode to NIGHR
mode setting.
RED : Adjust the strength of the red color.
BLUE : Adjust the strength of the blue color.
R-GAIN/B-GAIN : Specify the current color temperature manually.
1.
2.
3.
-
-
-
-
WHITE BAL
DAY/NIGHT DAY
MODE AWC
RED
[
00
]
----
I
----
BLUE
[
00
]
----
I
----
R-GAIN
[
0128
]
B-GAIN
[
0128
]
WHITE BAL
DAY/NIGHT NIGHT
BRIGHTNESS MID
MODE AWC
RED
[
00
]
----
I
----
BLUE
[
00
]
----
I
----
R-GAIN
[
0128
]
B-GAIN
[
0128
]
To Next Page
Loading...
