36_ camera setup
camera setup
COMMUNICATION
You can set the RS-485 communications setting in regard of the camera.
Select <MAIN MENU>-<COMMUNICATION>.
Select each item and set appropriately.
PROTOCOL, BAUD RATE, ADDRESS :
You can manually set the protocol, baud rate
and address.
SYSTEM INFO
You can check the system information.
Select <MAIN MENU>-<SYSTEM INFO>.
The current system information is displayed.
1.
2.
1.
2.
SYSTEM INFO
TYPE 4
_
12ZOM
_
WDR
_
P
PROTOCOL SAMSUNG-E
ADDRESS 0
COMM. TYPE RS485, HALF
BAUD RATE 9600
SERIAL NO. 000000000000000
CAMERA VER. v1.00
_
000000
COMMUNICATION
PROTOCOL SAMSUNG-E
BAUD RATE 9600
ADDRESS 0
To Next Page
Loading...
