Samsung SCX 3205 - HVPS Board

Product spec and feature
Service Manual
2-25
Samsung Electronics
■ HVPS Board
• Transfer High Voltage (THV+)
- Input Voltage : 24 V DC ± 15%
- Output Voltage : THV+: max +3.5kV ± 10 %,(Duty Variable, no loading )
THV-: -1kV±20% (when cleaning,200 ㏁)
- Input contrast of the Voltage stability degree : under ± 3 % (uctuating input 21.6V~26.4V)
Loading contrast : ± 3 % or less
- Output Voltage Rising Time : 50 ms Max
- Output Voltage Falling Time : 100 ms Max
- Fluctuating transfer voltage with environmental various : 0~3.5kV
- Environment Recognition Control Method : The THV-PWM ACTIVE is transfer active signal. It detects the
resistance by recognizing the voltage value, F/B, while permits the environmental recognition voltage.
- Output Voltage Control Method : Transfer Output Voltage is outputted and controlled by changing Duty of
THVPWM Signal.
• Charge Voltage (MHV)
- Input Voltage : 24 V DC ± 15%
- Output Voltage : -1.0KV ~ -1.8KV DC ± 3%
- Output Voltage Rising Time : 50 ms Max
- Output Voltage Falling Time : 50 ms Max
- Output Loading range : 30 MΩ ~ 1000 MΩ
- Output Control Signal(MHV-PWM) : CPU is HV output when PWM is Low
• Cleaning Voltage (THV- )
- The (+) Transfer Voltage is not outputted because the THV PWM is controlled with low.
- The (-) Transfer Voltage is outputted because the THV-Enable Signal is controlled with low
- The output uctuation range is big because there is no Feedback control.
• Developing Voltage (DEV)
- Input Voltage : 24 V DC ± 15%
- Output Voltage: -200V ~ -500V DC ±3%
- Output Voltage Fluctuation range: PWM Control
- Input contrast of the output stability degree : ± 3 % or less
Loading contrast : ± 3 % or less
- Output Voltage Rising Time : 50 ms Max
- Output Voltage Falling Time : 50 ms Max
- Output Loading range : 10MΩ ~ 1000 MΩ
- Output Control Signal (BIAS-PWM) : the CPU output is HV output when PWM is low.
• Supply
- Output Voltage : -350 V ~ -650V DC ±50 V(ZENER using, DEV )
- Input contrast of the output stability degree : under ± 5 %
Loading contrast : ± 5 % or less
- Output Voltage Rising Time : 50 ms Max
- Output Voltage Falling Time : 50 ms Max
- Output Loading range : 10 MΩ ~ 1000 MΩ
- Output Control Signal (BIAS-PWM) : the CPU is HV output when PWM is low.