Alignment and Troubleshooting
Service Manual
4-1
Samsung Electronics
4.1 Alignment and Adjustments
This chapter describes the main functions for servicing the equipment, such as the product maintenance
method, image quality proper repair procedures, jam removal procedures, and so on.
4.1.1 Control Panel
This control panel may differ from your machine depending on its model.
4. Alignment and Troubleshooting
1 Power ( ) Allows you to turn the power on or off.
2 Eco Print Turn the Eco mode on or off.
3 Scan to Sends scanned data.
4 ID Copy
Allows you to copy both sides the ID card like a driver’s license to a single
side of paper.
5 Front LED
When the LED lights on, place the front side of an ID card facing down on
the scanner glass.
6 Back LED
When the LED lights on, place the back side of an ID card facing down on
the scanner glass.
7 Display Shows the number of pages you want to copy.
8 +/- Buttons Allows you to increase/decrease the number of page you want to copy.
9
Print Screen
(SCX-3200/3205 only)
Prints the displayed screen of your monitor.
WPS (SCX-3205W(K) only) Allows you to turn on or off the wireless network connection.
10 Stop/Clear (
) Stops an operation at any time and there are more functions.
11 Start (
)
Begins a printing, copying or scanning job depending on which function you
are using.
12
Wireless LED
(SCX-3205W(K) only)
Shows the current status of the wireless network connection.
13 Status LED Shows the status of your machine.
To Next Page
Loading...
