4.1.3 JAM Removal
4.1.3.1 Clearing Paper Jams
If a paper jam occurs, the Status LED on the control panel lights orange. Find and remove the jammed paper.
To avoid tearing the paper, pull the
jammed paper out slowly and carefully.
Follow the instructions in the following
sections to clear the jam.
In tray
1. Open the scan unit rst, and then the inner
cover.
2. Close the inner cover and the scan unit in order.
The jammed paper is automatically ejected from
the machine.
If the paper does not eject, go to the next step.
3. Remove the jammed paper by gently pulling it
straight out.
If the paper does not move when you pull, or
if you do not see the paper in this area, check
inside the machine.
To Next Page
Loading...
