4.1.4.2 EDC mode menu conguration
0. Cover Status
Item Description
Front Cover When the front cover opened, “Open” message display LCD. If the front cover
closed, “Closed” message display LCD.
1. Sensor Status
Item Description
Regi / Feed / Exit
Sensor
If actuator is checked by sensor, "With Paper" message will be displayed. if not,
"Without Paper" will be displayed.
Empty If paper exists in the tray, “Present" will be displayed. If not, “Empty" will be.
2. Motor Test
Item Description
Main Mtr Nor. If “Enter” button is pushed after “ON” displayed, motor will be run. Main motor will
auto - stop after 60 seconds and ”OFF” message will be displayed.
3. Fan Test
Item Description
Fuser Fan If “Enter” button is pushed after “ON” displayed, fan will be run. Fuser fan will
auto - stop after 10 seconds and ”OFF” message will be displayed.
4. Clutch Test
Item Description
Pick up Clutch When “OK” key is pushed after ”ON” message displayed, clutch turn on. pick up
clutch will be turn off after 3 seconds and ”OFF” message will be displayed.
5. Fuser Ctrl
Item Description
Temp Control Fuser on and off. “ON” is selected, fuser will be active and display the fuser
temperature [XXX] but “OFF” is selected, fuser will be stop.
Fuser Temp. Fuser temperature displayed on LCD (example: [170] )
To Next Page
Loading...
