4.1.6 Upgrade Firmware
4.1.6.1 Upgrade rmware using USB port
[upgrading preparations]
- USBList.exe : Tool which sends rmware data to printer.
- Firmware le to upgrade
[Upgrade Procedure]
1. Connect USB cable to printer
2. Open DOS prompt and change path
3. Check preparation exist or not using “dir” command
4. Input command “usblist2.exe <rmware lename>”
5. rmware will be downloaded and machine starts upgrading
6. At this time, LED of machine is looping until upgrading is completed
7. When upgrading is completed, machine is automatically re-booting.
To Next Page
Loading...
