System setup
163
3. Useful Setting Menus
11
Network setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
• Press (Menu)> Network on the control panel,
Option Description
TCP/IP (IPv4)
Selects the appropriate protocol and configure
parameters to use the network environment.
There are lots of parameters to be set. If you are
not sure, leave as is, or consult the network
administrator.
TCP/IP (IPv6)
Selects this option to use the network environment
through IPv6 (see "IPv6 configuration" on page 147).
Ethernet Speed Configure the network transmission speed.
Clear Setting
Reverts the network settings to the default values.
(Reboot required.)
Network Conf.
This list shows information on your machine’s network
connection and configuration.
Protocol Mgr.
You can sets whether to use Ethernet on or off.
You can sets whether to use SyncThru™ Web Service or
not.
Option Description
To Next Page
Loading...
