Precautions
Service Manual
5-11
Samsung Electronics
6. Unplug the one connector and remove 5 screws
securing the ADF Motor Ass'y. Then take out the ADF
Motor Ass'y.
Note. It is not necessary to disassemble the ADF unit in
order to change the ADF separator pad. Simply
open the ADF cover and remove the Pickup Ass’y
(step 4 page 5.10). Then, using a pair of tweezers
or a small flat-bladed screwdriver, release the clips
on each side of the ADF Separator Pad Ass’y.
To Next Page
Loading...
