Precautions
Service Manual
5-15
Samsung Electronics
1. Before you remove the Main PBA, you should
remove:
- Rear Cover (see page 5-2)
- Side Cover(LH, RH) (see page 5-3)
2. Remove all of the connectors and the 5 screws con-
necting the Controller Shield Assembly to the Middle
Cover and frame and remove the assembly.
3. If fitted remove the 2 screws connecting the NIC card
to the Controller Shield Assembly and remove the card.
4. Remove 3 screws to remove the bracket from the
main board.
To Next Page
Loading...
