Service Manual
Precautions
5-16
Samsung Electronics
1. Before you remove the Engine Shield Ass'y, you
should remove:
- Rear Cover (see page 5-2)
- Side Cover(LH, RH) (see page 5-3)
- Scanner (see page 5-5)
2. Unplug the Exit, AC and Fan connectors. Unplug the
LIU connector if fitted.
3. Remove the 11 screws securing the Engine Shield
Ass'y and tilt to one side. Then unplug the all the
HVPS/SMPS harness before removing the ass’y.
4. Remove the 2 screws to remove the exit board.
To Next Page
Loading...
