Samsung SCX-4720FN - Clone Copying; Collation Copying

C OPYING 5.10
Clone Copying
This special copy feature can be applied only when you place a
document on the document glass. If a document is detected in
the ADF, Clone copying feature does not work.
1 Place the document to be copied on the document glass,
and close the cover.
2 Press Special Copy .
3 Press Special Copy or the scroll button ( or ) until
“Clone” displays on the bottom line.
4 Press Enter to make your selection.
5 If necessary, customize the copy settings, including number
of copies, darkness, and original type, by using the control
panel buttons. See “Setting Copy Options” on page 5.7.
N OTE : You cannot adjust the copy size using the Reduce/
Enlarge button while making a clone copy.
6 Press Start begin copying.
Collation Copying
This special copy feature is available only when you load
documents in the ADF.
1 Load the documents to be copied in the ADF.
2 Press Special Copy .
3 Press Special Copy or the scroll button ( or ) until “Copy
Collate” displays on the bottom line.
4 Press Enter to make your selection.
5 If necessary, customize the copy settings, including number
of copies, darkness, and original type, by using the control
panel buttons. See “Setting Copy Options” on page 5.7.
6 Press Start to begin copying.
1
2
3
1
2
3