2
G
ETTING
S
TARTED
2.31
Otherwise, just click
Finish
.
N
OTE
: After setup is complete, if your printer driver doesn’t work
properly, reinstall the printer driver.
See “Repairing Software” on
page 2.41.
Custom Installation for local printing
You can choose individual components to install.
1
Make sure that the printer is connected to your computer
and powered on.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click
Start
and
then
Run
. Type
X:\setup.exe
, replacing “
X
” with the letter
which represents your drive and click
OK
.
3
Click
Next
.
• If necessary, select a language from the drop-down list.
To Next Page
Loading...
