Samsung SCX-5312F - Page 12

Disassembly and Reassembly
3-2
Samsung Electronics
3-3 Scanner Ass'y
1. Before you remove the Scanner Ass'y, you
should remove:
- Rear Cover (see page 3-1)
2. Remove the six screws and take out the Shield
Main Upper.Unplug the one connector and CCD
cable.
Notice :
You should connector remove the CCD cable vertically to
avoid the CCD cable pin damage.
3. Remove the three screws, as shown below.
4. Open the Side Cover assembly first to open the
Front cover. In the other words, close the front
cover first to assembly it.
.
5. Remove two screws.
Shield Main Upper
Side Cover Ass’y
Front Cover
1
2