Samsung SCX-5312F - Page 14

Disassembly and Reassembly
3-4
Samsung Electronics
12. Unlatch the Scan Upper Ass'y securing the
glass and remove it.
Notice :
When foreign material enters into the Scan Assy, it may
cause problems in product performance and deteriorate
scan image. Therefore, you should always dismantle or
assemble it at a clean place.
13. Remove the two scews and pull the Dummy
Upper Ass’y.
14. Remove the four screws and Channel Base
Frame.
15. Remove the five screws and Dummy Scan-
Lower.
Dummy Upper Ass’y
Channel Base Frame
Cover Dummy Lower
Cover Scan Lower