G
ETTING
STARTED
1
.
2
Unpacking
1
Remove the shipping tapes from the front, back, and sides
of the prodcut.
2
Remove the label completely from the scanner module by
pulling it straight, and the scan unlock switch automatically
moves to the unlock position
()
.
N
OTE:
To scan or copy a document, the
switch must be on that position. When you
are moving the product or do not use the it
for a long time, pull the switch toward the
Lock mark ( ).
3
Pull open the paper cassette and remove the packing
material from the paper cassette.
Tape
Scanner
module
To Next Page
Loading...
