Samsung SCX-5835 Series - Workform Creating Screen; Various Operations with Workform; Scan to Multi-Destination

using standard workflow_ 2
•Name: Shows the workform name.
•Input: Shows the workform’s input module name.
•T
ransmit: Shows the workform’s transmit module name. If two or more
modules are added in transmit workform, this column displays Multi
without any icon.
•Pr
operties: Shows the workform’s perperties.
•Cr
eate: Creates a new private workform.
•Delete: Deletes the selected workform.
•Edit: Lets you to modify a workform.
•De
tail: Shows detailed workform information.
•Search: Searches a workform with a workform name.
•T
ask: Imports a workform from USB, export a workform to USB,
copy or move a workform to public
workform. It also makes a
shortcut in favorite workform tab by clicking Set to Favorit
e WF or
removes the shortcut by clicking Set to Normal WF.
•Ex
ecute: Start the job defined in the workform.
Workform Creating Screen
You can create a new workform. To add a new workform, press Create on
the My Workform or Public Workform tab.
You can create maximum 100 workforms.
Input Tab
•Input: Shows the workform’s input module name.
•Status: Shows the setting status. To create a workform, you have to
set
every mandatory items of the assigned input module.
After you do fill out all mandatory items, the Save & Execute
and Save button are enabled.
•Settings: Configures the setting values for the module.
•Next: Goes to the next tab.
Transmit Tab
•Transmit: Shows the workform’s transmit module name.
•Status: Shows the setting status. To create a workform, you have to
set eve
ry mandatory items of every assigned transmit modules.
After you do fill out all mandatory items, the Save & Execute
and Save button are enabled.
•Add
Module: Add transmit module(s).
Before you add module, make sure that the parameters are
correctly configured for each module.
•F
ax: See "Preparing to fax" on page 1.
•Email: See "Scanning originals and sending through email
(Scan to Email)" on page 3.
•Ser
ver: See "Scanning originals and sending via SMB/FTP
(Scan to Server)" on page 6
•Delete
: Deletes the selected module.
•Settings: Configures the setting values for the module.
•Previous: Goes to the next tab.
•Nex
t: Goes to the next tab
Properties Tab
•Workform Name: Sets the workform name.
•Delay
Start: Schedule the start date and time to start.
•Expired: Sets the expire date.
•Secu
red: Locks the workform with password protection.
•Previous: Goes to the next tab.
VARIOUS OPERATIONS WITH WORKFORM
User can operate various jobs with workforms. The following items show
some example cases.
Scan to multi-destination
You can scan a document once and send it to multiple destinations such as
email, SMB/FTP server, document box, and print.
Before you add module, make sure that the parameters are correctly
configured for each module.
•Fax: See "Preparing to fax" on page 1.
•Email, S
erver: See "Scanning originals and sending via SMB/FTP
(Scan to Server)" on page 6.