Samsung SCX-5935FN - DADF Board

Disassembly and Reassembly
Service Manual
3-7
Samsung Electronics
3.3.6 DADF Board
1. Open the DADF back. And Lift it up after remove
the connector.
2. Remove the 5 screws from the bottom of DADF.
3. Remove the Sponge.
4. Remove the 3 screws from the bottom of DADF.
And remove the COVER-DADF-FRONT/REAR.
5. Disassemble the Stacker.
6. Remove all harness and 2 screws.