4.1.7 Firmware Upgrade
• USB and Network port are used to F/W upgrade.
• Network applications (SWAS, SWS) can be used for network port upgrade.
4.1.7.1. Using the common method
①
Download the rmware le in the temporary folder. And unzip the le.
②
Delete all current jobs from Job Status window
③
Connect USB cable in the machine (idle state)
④
Send rmware le( *.hd ) by usblist2
- Drag the f/w le and Drop down on the usbprn2.exe. And then f/w update will be started automatically.
⑤
Please wait until end reboot.
To Next Page
Loading...
