4.1.8 Diagnostics
4.1.8.1 Introduction
This document will capture the behavior specications for the GUI Windows for Diagnostics. Each section of
this document describes one feature with a step window image and script.
However, used window image is not xed image from the specication point of view. Acquire detail
information from script. Window image is just example image will be implemented.
4.1.8.2 How to enter diagnostics mode
1. Press (1,2,3) key on dial pad simultaneously.
2. Enter password(1934).
3. Press ‘OK’ button.
4.1.8.3 How to exit diagnostics mode
By pressing the Home button, exit Diagnostics mode.
When exit Diagnostics mode, a popup window shall display.
By default, Reset Counters is No, Reboot Copier is Yes.
To Next Page
Loading...
