• Diagnostics>Test Routines>Copier>NVM Read/Write>Edit
4.1.8.7 Test Routines Tab
4.1.8.7(a) Copier
NVM Read/Write
• Diagnostics>Test Routines>Copier>NVM Read/Write
“Edit” button shall be disabled until any NVM item is selected.
“Edit” button shall be disabled when read only NVM is selected. Search edit box has 00-000 as a default.
User shall input the whole number to nd a specic NVM by pressing Find button. (Refer to NVM Read/Write
table) If matching NVM is found, the page including the specied NVM shall be displayed and the NVM is
shown as selected. If matching NVM is not found, error message such as “Invalid NVM number” shall be
displayed on the status area and search edit box displays default number.
To Next Page
Loading...
