Samsung SCX-8030ND Series - Page 111

3.Replaceme
n
3. Replacement proc
e
3.1 General precautions on
When you disassemble and reassemble components,
of cables to moving parts makes proper routing a mu
s
by the procedure must be restored as close as possib
component from the machine note the cable routing th
component
from
the
machine
,
note
the
cable
routing
th
Whenever servicing the machine, you mu
s
1. Check to verify that documents are not stored in m
e
2. Be sure to remove the toner cartridge before you di
s
3. Unplug the power cord.
4. Use a flat and clean surface.
5. Replace only with authorized components.
6. Do not force plastic-material components.
7. Make sure all components are in their proper positi
o
Service Manual
SCX-8030/8040 series
3-
n
t Procedure
e
dure
disassembl
y
you must use extreme caution. The close proximity
s
t. If components are removed, any cables disturbed
le to their original positions. Before removing any
hat will be affected
hat
will
be
affected
.
s
t perform the following:
e
mory.
s
assemble parts.
o
n.
SAMSUNG ELECTRONICS
Version 0.05
1