Samsung SCX-8030ND Series - Pulley-Belt

3.Replaceme
n
3.4.8 Pulley-belt
Perform the following procedure to remove the Pulley
-
1. Remove the rear cover. (3.4.3)
2. Remove the E-Ring [A] with tweezers, and remove t
h
[B]
[A]
NOTE
Remove cover [A] (see below), this allows you to easil
y
[A]
Service Manual
SCX-8030/8040 series
3-
1
n
t Procedure
-
Belt from the Scan Unit.
h
e Pulley-belt [B].
y
remove the scan gear and gear belt.
SAMSUNG ELECTRONICS
Version 0.05
1
7