Samsung SCX-8030ND Series - Scan Motor and Gear Belt; Home Sensor

3.Replaceme
n
Perform the following procedure to remove the Scan m
o
1. Remove the Spring [A].
2 Remove 3 screws
3.4.9 Scan motor and gear belt
2
.
Remove
3
screws
.
3. Release the gear belt from the gear. Remove the Sc
a
[A]
[C]
Perform the following procedure to remove the Home
S
1. Remove the scan glass(3.4.1) and rear cover(3.4.3).
2. Release the home sensor [A] by pushing sensor hin
g
3.4.10 Home sensor
[A]
Service Manual
SCX-8030/8040 series
3-
1
n
t Procedure
o
tor and Gear belt from the Scan Unit.
a
n Motor [C].
[B]
S
ensor from the Scan Unit.
g
e from the rear.
SAMSUNG ELECTRONICS
Version 0.05
1
8