Samsung SCX-8030ND Series - Video Controller

3.Replaceme
n
3.7.3 Video controller
1 Remove the Rear cover and Rear shield
Perform the following procedure to remove the Video
C
1
.
Remove
the
Rear
cover
and
Rear
shield
.
2. Take off the Top Slot [A] after removing 5 screws.
[A]
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
3. Take off the Bottom Slot [B] after removing 2
screws.
[B]
Service Manual
SCX-8030/8040 series
3-
4
n
t Procedure
4. Take off the video controller after removin
g
7
C
ontroller PBA from the printer.
g
screws and all connectors.
MSOK
CAUTION
When replacing the Video board, you must
insert the MSOK and Memory on the new video
PBA.
SAMSUNG ELECTRONICS
Version 0.05
4
6