Samsung SCX-8030ND Series - Joint PBA; Toner PBA

3.Replaceme
n
3.7.4 Joint PBA
To remove the Joint PBA from the printer, remove 4 sc
r
3.7.5 Toner PBA
Perform the following procedure to remove the Toner
1. Unplug the flat cable and remove 4 screws.
2. Open the engine shield.
Perform
the
following
procedure
to
remove
the
Toner
Service Manual
SCX-8030/8040 series
3-
4
n
t Procedure
r
ews and all of the connectors.
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
NOTE
You will need a short screwdriver
You
will
need
a
short
screwdriver
.
PBA from the printer
3. To remove a Toner PBA, remove 1 screw and 1
connector.
PBA
from
the
printer
.
SAMSUNG ELECTRONICS
Version 0.05
4
7