Samsung SCX-8030ND Series - Smps Fan

3.Replaceme
n
3.7.11 SMPS Fan
Perform the following procedure to remove the SMPS
[A]
[B]
Service Manual
SCX-8030/8040 series
3-
5
n
t Procedure
1. Remove the rear cover.
(
refer to 3.2.3
)
Fan from the printer.
()
2. Remove the 6 screws from the SMPS box.
3. Unplug 2 connectors from DC power PBA.
4. Unplug the connector from the fan you want to
replace.
SAMSUNG ELECTRONICS
Version 0.05
5
3