Samsung SCX-8030ND Series - Temperature Sensor

3.Replaceme
n
3.7.16 Temperature sensor
3.7.16.1 Outer Temperature sensor
1. Remove the left cover. (Refer to 3.2.2 Left cover.)
2. Remove the outer temperature sensor after removi
n
3.7.16.2 Inner Temperature sensor
1. Open the Cover-Side and remove the fuser unit. (R
e
2. Remove the sensor cover after removing 3 screw.
3. Unplug the connector and release the temperature
s
Service Manual
SCX-8030/8040 series
3-
5
n
t Procedure
n
g 1 screw and connector.
e
fer to 3.5 Fuser unit)
s
ensor.
SAMSUNG ELECTRONICS
Version 0.05
5
9