Samsung SCX-8030ND Series - Main Drive Motor; Main Drive Clutch

3.Replaceme
n
3.8.1 Main drive motor
There are 2 identical motors in the main drive unit.
To remove a motor, remove 4 screws and 1 connector.
3.8.2 Main drive clutch
1 Remove the bracket after removing 2 screws and
1
.
Remove
the
bracket
after
removing
2
screws
and
the Fixer.
Fixer
Service Manual
SCX-8030/8040 series
3-
6
n
t Procedure
CAUTION
Be careful not to change the two connectors.
The arrows indicate the proper connector for each
motor (Grey/Black for right side motor, Grey/Blue
for left side motor)
2 Remove the clutch after unplugging the connector
2
.
Remove
the
clutch
after
unplugging
the
connector
and E-ring.
E-ring
SAMSUNG ELECTRONICS
Version 0.05
6
2