Samsung SCX-8030ND Series - Exit Drive Unit

3.Replaceme
n
This section contains the procedures for disassemblin
g
To remove the Exit Drive Unit, perform the following p
r
3.9 Exit drive unit
1. Remove the engine controller shield.
2. Remove fuser out fan and duplex fan after removin
g
3. Remove exit drive unit after removing 3 screws an
d
Service Manual
SCX-8030/8040 series
3-
6
n
t Procedure
g
the Exit Drive Unit components of the printer.
r
ocedure.
g
4 screws.
d
all of the connectors.
SAMSUNG ELECTRONICS
Version 0.05
6
3