Samsung SCX-8030ND Series - WTB Leveling Drive Unit

3.Replaceme
n
3.13 WTB leveling drive unit
[A]
[B]
[C]
[H]
Service Manual
SCX-8030/8040 series
3-
6
n
t Procedure
1. Open the front cover.
2. Remove the waste toner container [A].
3 Open the side door
3
.
Open
the
side
door
.
4. Remove the toner cartridge [B] and the imaging
unit [C].
CAUTION
Be careful not to scratch the surface of the imaging
unit.
To prevent damage, do not expose the imaging unit
to light for more than a few minutes. Cover it with a
piece of paper to protect it if necessary.
5. Remove 2 screws and 2 pins [H].
6. Remove the front cover.
SAMSUNG ELECTRONICS
Version 0.05
6
8