Samsung SCX-8030ND Series - DADF Unit

3.Replaceme
n
3.16 DADF unit
This section contains the procedures for disassemblin
To remove the DADF Unit, perform the following proc
e
Hinge cover
Service Manual
SCX-8030/8040 series
3-
7
n
t Procedure
g the DADF Unit components of the printer.
e
dure.
1. Remove the left/right hinge cover.
2. Remove 1 screw.
3. Open the connector cover. Remove 1 screw. And
unplug the connector.
SAMSUNG ELECTRONICS
Version 0.05
7
5