Samsung SCX-8030ND Series - Page 193

3.Replaceme
n
10. Put in the supporting rubber into the DADF cable
c
the screw.
11. Open the DADF and place the white sheet. White
s
aligned it with the registration guide at the top left
c
12. Carefully close the DADF. The white sheet will be
a
attached properly when the DADF is opened, stick
ti k
Service Manual
SCX-8030/8040 series
3-
8
s
ti
c
k
ers.
n
t Procedure
c
over. Assemble the DADF cable cover. And tighten
s
ide should be faced down on the scanner glass and
c
orner of the glass.
a
ttached to the DADF. If the white sheet is not
the white sheet on the DADF properly using the
SAMSUNG ELECTRONICS
Version 0.05
8
3