Samsung SCX-8030ND Series - Pick-Up Unit

3.Replaceme
n
3.19 Pick-Up Unit
1. Open the Tray1 [A], Tray2 [B] and Side Cover [C].
Perform the following procedure to remove the Pick-u
p
[C]
[A]
[B]
2. Remove 7 screws [D] and Harness Cover [E].
[D]
[E]
Service Manual
SCX-8030/8040 series
3-
9
n
t Procedure
3. Remove the pickup unit and unplug the connectors.
p
Unit from the printer.
4. Change Upper-limit Sensor [A], Empty Sensor [B]
and Take-away open sensor [C].
[C]
[A]
[C]
[B]
SAMSUNG ELECTRONICS
Version 0.05
9
8