Samsung SCX-8030ND Series - Information; General; Supply Status

4.Servi
c
4.3 Information
4.3.1. General
This menu displays the machine’s serial number, as
s
call, and the day of first service.
4.3.2. Supply Status
• Information > General
• Information > Supply Status > Customer Re
p
4.3.2.1. Customer Replacement Unit
(
This menu displays the machine’s customer replace
m
to check the information of the selected unit.
4.3.2.2. Field Replacement Unit (FRU
)
• Information > Supply Status > Field Replac
e
This menu displays the machine’s field replacement
check the information of the selected unit.
In the CRU and FRU list, there are four columns : ite
• Item : Refer to the table below.
• Status : This shows the current status of the selec
t
• OK : The current count is smaller than the
d
• Check : The current count is bigger than d
e
• Off : The current count exceeds the max lif
e
• Count : This shows the current count of the selecte
d
M
lif Thi h th it f th l
•
M
ax.
lif
e :
Thi
s s
h
ows
th
e max capac
it
y o
f
th
e se
l
e
c
Users can edit the default warning value within the g
i
Selecting some items will enable the reset button to
r
Unit Item Ma
x
Toner Cartridge Black
35K
20K
Imaging Unit Black 100K
Service Manual
SCX-8030/8040 series
4
-
c
e Mode
s
igned IP address, printed impressions since last
p
lacement Unit
(
CRU)
m
ent unit status. Users can select one item in the list
)
e
ment Unit
unit status. Users can select one item in the list to
ms, status, current, max life.
t
ed item.
d
efault warning value
e
fault warning value
e
.
d
item.
tdit
ct
e
d
it
em.
i
ven threshold.
r
eset the current count to 0 after replacing the unit.
x
. Life
Default
Warning Value
Threshold
10% 5 ~ 30%
10% 5 ~ 30%
SAMSUNG ELECTRONICS
Version 0.05
-
6