Samsung SCX-8030ND Series - Engine Test Routines

4.Servi
c
4.5.1.2. Engine Test Routines
• Dia
g
nostics > En
g
ine Dia
g
nostics > En
g
ine
T
Purpose To perform test routines for the
Oti
Wh th i E i T t R
O
pera
ti
on
Procedure
Wh
en
th
e ma
i
n
E
ng
i
ne
T
es
t
R
o
u
through the list of routines that
d
also directly input an EDC cod
e
a maximum of 3 routines at the
A
fter selecting one or multiple r
o
window that lists selected routi
n
Verification N/A
Specification N/A
Reference Table 5-2
Code Displayed Name
100-0010 Tray1 feed motor (Main feed motor)
100-0030 Tray3 feed motor (Option feed motor)
100-0070 Tray1 elevating motor
100-0080 Tray2 elevating motor
100-0090 Tray3 elevating motor
100
0100
Tray4 elevating motor
100
-
0100
Tray4
elevating
motor
100-0170 Duplex motor forward
100-0210 Exit2 motor forward
100-0220 Exit2 motor backward
100-0250 Duplex motor Half Speed
100-0260 Main motor
100-0300 Black OPC/DEV motor
100-0410 Toner supply motor black
100-0420 Waste toner motor
100-0440 Fuser motor
100
0460
Fuser gap motor
100
-
0460
Fuser
gap
motor
100-5070 Black OPC/DEV motor ready
100-5160 Fuser motor ready
100-5200 LSU motor1 run ready
101-0010 Tray1 pick up clutch
Service Manual
SCX-8030/8040 series
4-
1
c
e Mode
T
est Routines
engine.
ti i d di l i t
uti
nes w
i
n
d
ow
di
sp
l
ays, users can nav
i
ga
t
e
d
isplay along with their descriptions. Users can
e
to the text box to find a routine. Users can select
same time.
o
utines, pressing the “OK” button will open the test
n
es. Users can start/stop a desired test routine.
Meaning
Tray1 feed motor on/off
Tray3 feed motor on/off
Tray1 elevate motor on/off
Tray2 elevate motor on/off
Tray3 elevate motor on/off
Tray4 elevate motor on/off
Tray4
elevate
motor
on/off
Duplex motor forward on/off
Exit2 motor forward running/stop
Exit2 motor backward running/stop
Duplex motor Half Speed on/off
Main motor is on/off
Black OPC/DEV motor is on/off
Toner dispense(supply) motor on/off
* Toner must not be installed.
Waste toner motor on/off
Fuser motor forward on/off
Fuser press control motor on/off
Fuser
press
control
motor
on/off
Detect if black OPC/DEV motor runs at normal spe
ed
Detect if fuser motor runs at normal speed
Detects if LSU motor1 runs at normal speed
Engages drive to pick up a paper from tray1
SAMSUNG ELECTRONICS
Version 0.05
1
6