Samsung SCX-8030ND Series - Page 248

4.Servi
c
• Diagnostics > Adjustment > Finisher Ad
j
ust
m
Purpose To correct hole punching positi
o
Operation
Procedure
1. Choose one item from the
• Punch Hole DOF Position
–
• Punch Hole STS Position –
S
position
2. Select one item and press t
h
3. Change the adjustment val
u
to lead edge, while - value
4. Press the “OK” button to ap
Verification Print out with punch hole and c
h
Specification
DOF Position Unit: mm, Scale:
0
STS Position Unit: mm, Scale:
0
Reference N/A
Diagnostics >
Adjustment
>
Finisher Adjustm
•
Diagnostics
>
Adjustment
>
Finisher
Adjustm
Purpose To correct stapling position.
Operation
Procedure
1. Choose one item from th
e
• Staple STS Position (ⓐ)
• Front Dual Staple DOF Posi
• Rear Dual Sta
p
le DOF Posi
t
p
2. Select one item and press
t
3. Change the adjustment val
u
to lead edge or rear positio
n
front position.
4. Press the “OK” button to a
p
Verification Print out with stapling and che
c
Specification
Staple STS Position Unit: mm S
Specification
Staple
STS
Position
Unit:
mm
.
S
DOF Position Unit: mm, Scale:
STS Position Unit: mm, Scale:
0
Reference
R
Lead-Edge
F
Service Manual
SCX-8030/8040 series
4-
3
c
e Mode
m
ent > Punch Hole Position
o
n. Only available when punch kit is installed.
table. There are two items to choose.
Direction of feedin
g
p
osition
gp
S
ide to side position. That is perpendicular to DOF
h
e edit button.
u
e with arrow button. + value moves the position
moves the position to trail edge.
ply the new value to the system.
h
eck the punch hole position is located as adjusted.
0
.1, Min/Max: ±50mm
0
.1, Min/Max: ±50mm
ment > Staple Position
ment
>
Staple
Position
e
table. There are three items to choose.
tion (
ⓑ)
t
ion
(
ⓒ
)
(
ⓒ
)
t
he edit button.
u
e with arrow button. + value moves the position
n
, while - value moves the position to trail edge or
p
ply the new value to the system.
c
k the stapling position is located as adjusted.
Scale: 0 1 Min/Max:
±
50mm
Scale:
0
.
1
,
Min/Max:
±
50mm
0.1, Min/Max: ±50mm
0
.1, Min/Max: ±50mm
ⓒ
Finisher
R
ear
Front Cover
ⓐ
ⓑ
Paper Trail-Edge
ront
SAMSUNG ELECTRONICS
Version 0.05
3
6