Samsung SCX-8030ND Series - Color Management

4.Servi
c
4.5.6. Color Management
• Diagnostics > Color Mana
g
ement > Auto T
o
4.5.6.1. Scan CTD
Purpose To correct image quality when
This function needs to be perf
o
“Machine Setup > General Set
t
administrators.
Operation 1. Run Scan CTD
Procedure 2. Print out a test pattern. No
t
size. Make sure that requi
r
3. When the test pattern is pr
i
4. The arrow in left top of the
scan glass and to be place
5. Run the pattern scanning
b
6. Exit Scan CTD mode.
Verification Print out a test job and make s
u
Specification N/A
Reference N/A
Service Manual
SCX-8030/8040 series
4-
3
c
e Mode
o
ne Ad
j
ustment > Scan CTD
density of the image is poor.
o
rmed after density of color is changed from
t
ings > Color > Density Adjustment “ by
t
e that the test pattern is designed for A3 or ledger
r
ed media size is loaded in a tray.
i
nted out, locate the pattern on the scanner.
test pattern need s to head to the left-top side of
d face down.
b
y pressing “OK” button.
u
re the image quality has recovered.
SAMSUNG ELECTRONICS
Version 0.05
3
9